Ashly CA 1.54 - Four-Channel Install Power AmplifierAvailable in 2 and 4 channel configurations with 500W, 1,000W or 1,500W per channel, there's a CA that's right for your project. CA amps are designed to excel in Performance Installations, such as theaters, school auditoriums and Houses of Worship. Power hungry sub woofers? No problem. CA does 2 Ohms lying down. However, with 70 and 100V direct drive capability and more integration friendly features than you'd typically find on many amplifiers, they

brightening the brilliance/air or making the bottom end of a mix sound huge while simultaneously avoiding "pumping" or "breathing" artifacts and increasing headroom

This allows the DIRECT4 to be used as if it were four completely separate DIs without fear of creating ground loop interaction

Using the dedicated "Yamaha LAN Monitor" software allows quick troubleshooting

Equipped with an on-board Dante port

The design begins with a traditional 1/4" guitar input and passive thru-put to feed a stage amp

Run UAD Powered Plug-Ins via Thunderbolt 3 on modern Mac and Windows 10 systems (backwards compatible with Thunderbolt 1 and 2 devices)

They also offer excellent sonic reproduction with all the detail and balanced linear phase and frequency response users have grown to trust from DPA Microphones

Switch vocal microphone from PA to intercom

Concert Sound

Eight-channel AES/EBU digital format I/O with 25-pin D-sub connector (Yamaha AES Standard) for Yamaha MY (Mini-YGDAI) products

Screws and fixing nuts for a 40 mm thick table are included

Connectors: Right-angle 8-pin Mini-DIN to Same